I had previously installed a sender board for the EMW EV Dashboard Android app:
Today, I hooked up the BlueTooth module and got it calibrated and running to my taste. Here is a screen shot:
It shows current (both analog and digital), voltage (both analog and digital), charge (both analog and amp-hours remaining), and power being consumed. I drove about 5 miles around the section block - the app worked really well. And it looks like my estimate of roughly 50 miles range is going to be accurate - I consumed about 7 Ah for the 5 mile range. 70% DOD from 100 Ah is 70 Ah - and 70 Ah * 5 Mi / 7 Ah = 50 miles. To one significant digit.
Today, I hooked up the BlueTooth module and got it calibrated and running to my taste. Here is a screen shot:
It shows current (both analog and digital), voltage (both analog and digital), charge (both analog and amp-hours remaining), and power being consumed. I drove about 5 miles around the section block - the app worked really well. And it looks like my estimate of roughly 50 miles range is going to be accurate - I consumed about 7 Ah for the 5 mile range. 70% DOD from 100 Ah is 70 Ah - and 70 Ah * 5 Mi / 7 Ah = 50 miles. To one significant digit.
No comments:
Post a Comment